Troubleshooting_ 106
In the multi-purpose tray
1. If the paper is not feeding properly, pull the paper out of the machine.
2. Open and close the side cover. Printing automatically resumes.
In the fuser area or around the toner cartridge
1. Open the side cover.
2. Remove the jammed paper, in the direction shown.
3. Close the side cover.
In the paper exit area
1. Open the side cover.
2. Gently pull the paper out through the exit area.
3. Close the side cover. Printing automatically resumes.
The fuser area is hot. Take care when removing paper from the
machine.
To Next Page
Loading...
Need help?
General
