Samsung SCX-6545N Series User Manual

Installing Printer Software in Windows
11
Reinstalling Printer Software
You can reinstall the software if installation fails.
1 Start Windows.
2 From the Start menu select Programs or All Programs → your
printer driver name → Maintenance .
3 Select Repair and click Next .
4 The list of printers available on the network appears. Select the
printer you want to install from the list and then click Next .
•If you do not see your printer on the list, click
Update to refresh
the list, or select Add TCP/IP Port to add your printer to the
network. To add the printer to the network, enter the port name
and the IP address for the printer.
•To find a shared network printer (UNC Path), select
Shared
Printer [UNC]
and enter the shared name manually or find a
shared printer by clicking the Browse button.
You will see a component list so that you can reinstall any item
individually.
NOTE : If your printer is not already connected to the computer, the
following window will appear.
• After connecting the printer, click
Next .
• If you don’t want to connect the printer at this time, click Next , and No
on the following screen. Then the installation will start and a test page
will not be printed at the end of the installation.
• The reinstallation window that appears in this User’s Guide may
differ depending on the printer and interface in use.
5 Select the components you want to reinstall and click Next .
If you installed the printer software for local printing and
you
select your printer driver name , the window asking you to print a
test page appears. Do as follows:
a. To print a test page, select the check box and click
Next .
b. If the test page prints out correctly, click Yes .
If it doesn’t, click
No to reprint it.
6 When the reinstallation is done, click Finish .

Samsung SCX-6545N Series Specifications

General

Brand	Samsung
Model	SCX-6545N Series
Category	All in One Printer
Language	English