Getting started
9
Maintaining water and dust resistance
The device may be damaged if water or dust enters the device. Follow these tips carefully to
prevent damage to the device and to maintain the water- and dust-resistant performance of
the device.
•
Do not immerse the device in water deeper than 1 m and keep it submerged for more
than 30 minutes.
•
Do not expose the device to water at high pressure, such as ocean waves or a waterfall.
•
If the device or your hands are wet, dry them thoroughly before handling the device.
•
Do not expose the device to salt water, ionised water, or soapy water.
•
If the device is dropped or receives an impact, the water and dust resistant features of
the device may be damaged.
•
If the device has been immersed in water or the microphone or the speaker is wet,
sound may not be heard clearly during a call. Ensure that the microphone or the speaker
is clean and dry by wiping it with a dry cloth.
•
If the device gets wet, dry it thoroughly with a clean, soft cloth.
•
The touch screen and other features may not work properly if the device is used in water
or in other liquids.
•
Your device has been tested in a controlled environment and shown to be water and
dust resistant in certain circumstances (meets requirements of classification IP67 as
described by the international standard IEC 60529 - Degrees of Protection provided by
Enclosures [IP Code]; test conditions: 15 - 35 °C, 86 - 106 kPa, 1 meter, for 30 minutes).
Despite this classification, your device is not impervious to water damage in any
situation.
To Next Page
Loading...
Need help?
General