Basic functions
29
Taking photos
OIS may not function properly when:t
You move your camera to follow a moving subject. -
You use digital zoom. -
There is too much camera shake. -
The shutter speed is slow. -
(For example, when you select Night in the
s
mode)
The battery is low. -
You take a close-up shot. -
If you use the OIS function with a tripod, your images may be blurred t
by the vibration of the OIS sensor. Deactivate the OIS function when
you use a tripod.
If the camera is impacted, the display will be blurry. In this case, turn t
off the camera and turn it on again to use the OIS function correctly.
In some scene modes, the OIS function is unavailable.t
Reducing camera shake (OIS)
Reduce camera shake optically in Shooting mode.
Before correction After correction
In Shooting mode, press [
1
m
].
Select
2
a
OIS an option.
Option Description
Off: Deactivate the OIS function.
On: Activate the OIS function.
pASMsv
To Next Page
Loading...
Need help?
General
