4 S&C Instruction Sheet 716-500
Understanding
Safety-Alert
Messages
Several types of safety-alert messages may appear throughout this instruction sheet and on
labels and tags attached to the S&C Series 2000 Circuit-Switcher, Model 2030. Familiarize
yourself with these types of messages and the importance of these various signal words:
DANGER
“DANGER” identifies the most serious and immediate hazards that will likely result in
serious personal injury or death if instructions, including recommended precautions, are
not followed.
WARNING
“WARNING” identifies hazards or unsafe practices that can result in serious personal
injury or death if instructions, including recommended precautions, are not followed.
CAUTION
“CAUTION” identifies hazards or unsafe practices that can result in minor personal injury
if instructions, including recommended precautions, are not followed.
NOTICE
“NOTICE” identifies important procedures or requirements that can result in product or
property damage if instructions are not followed.
Following Safety
Instructions
If you do not understand any portion of this instruction sheet and need assistance, contact
your nearest S&C Sales Ofce or S&C Authorized Distributor. Their telephone numbers are
listed on S&C’s website www.sandc.com, or call S&C Headquarters at (773) 338-1000; in
Canada, call S&C Electric Canada Ltd. At (416) 249-9171.
NOTICE
Thoroughly and carefully read this instruction sheet
before installing your S&C Series 2000 Circuit-Switcher
Model 2030.
Replacement
Instructions
and Labels
If you need additional copies of this instruction sheet, contact your nearest S&C Sales Ofce,
S&C Authorized Distributor, S&C Headquarters, or S&C Electric Canada Ltd.
It is important that any missing, damaged, or faded labels on the equipment be replaced
immediately. Replacement labels are available by contacting your nearest S&C Sales Office,
S&C Authorized Distributor, S&C Headquarters, or S&C Electric Canada Ltd.
Safety Information
To Next Page
Loading...
Need help?
General
