S&C 2030 User Manual

S&C Instruction Sheet 716-500 9
Shipping and Handling
Inspection
Examine the shipment for damage as soon after receipt
as possible, preferably before removal from the carrier’s
conveyance. Check the bill of lading to make sure all shipping
skids, crates, and containers listed are present.
If there is visible loss and/or damage:
1. Notify the delivering carrier immediately.
2. Ask for a carrier inspection.
3. Note the condition of the shipment on all copies of the
delivery receipt.
4. File a claim with the carrier.
If concealed damage is discovered:
1. Notify the delivering carrier within 15 days of receipt of
shipment.
2. Ask for a carrier inspection.
3. File a claim with the carrier.
Also notify S&C Electric Company in all instances of loss
and/or damage.
Packing
An S&C catalog drawing can be found in a water-resistant
envelope attached to the wrapper around one of the insulating
support columns. Study this drawing carefully and check the
bill of material to verify all parts are at hand. The Model 2030
Series 2000 Circuit-Switcher shipment should include the
following items, as shown in Figures 1, 2a and 2b on pages
10 and 11.
CAUTION
Do not intermingle components from different
installations. Series 2000 Circuit-Switchers are
completely factory assembled and thoroughly tested.
To speed installation and maintain proper adjustment
of the circuit-switcher and its operator, it is imperative
that components belonging to a specific circuit-switcher
installation not be mixed with components belonging to
a different installation. For this reason, each Series 2000
Circuit-Switcher is serially numbered. This serial number
appears on the circuit-switcher base, the mounting
pedestals, and the operator.
Mixing parts from different circuit-switchers will result
in significant damage to the switch operator and
misoperation of the circuit-switcher.
S&C maintains an historical record—by serial number—of
every circuit-switcher it produces. This record lists informa-
tion pertinent to each installation, such as application, date of
shipment, and any service performed by S&C factory service
specialists. This record is an invaluable reference for future
maintenance, modifications or replacements.
The shipment contains:
• Three interrupters, mounted to the high-speed base for
shipping along with their associated insulating support
columns
• A single high-speed base, enclosing the high-speed
power train.
• The appropriate number of mounting pedestals (A single
pedestal is used for Circuit-Switchers rated 69 kV (with
48-inch phase spacing); a set of two pedestals is used for
Circuit-Switchers rated 69 kV (with 84-inch phase spac-
ing), 115 kV and 138 kV; a set of three pedestals is used
for Circuit-Switchers rated 161 kV and 230 kV
• A Series 2000 Circuit-Switcher Operator
• A container of miscellaneous operating-mechanism
components and hardware—all individually identied
• Any optional features specied, such as a grounding
switch
DANGER
DO NOT disassemble or modify the interrupters. The
interrupters are pressurized at 75 PSIG. Serious injury
can result.
Storage
NOTICE
Connect control power to the switch operator when
storing it outdoors. The Series 2000 Switch Operator is
equipped with a space heater that must be energized
during storage to prevent condensation and corrosion
within the operator enclosure.
If the circuit-switcher must be stored before installation,
keep it in a clean, dry, corrosion-free area to protect it from
damage. Make sure each skid rests rmly on the ground and
is reasonably level. Shoring under the skids may be necessary
if the ground is uneven. If storing outdoors, connect control
power to the space heater inside the Series 2000 Switch
Operator per the wiring diagram furnished. Inspect the
circuit-switcher regularly when storing for prolonged periods.
NOTICE
Please complete and mail the circuit-switcher registration
card (enclosed in a vinyl envelope located inside the
operator) after the circuit-switcher has been installed.
The information requested on this card is vital to ensure
prompt notification in the event field modifications are
needed.

S&C 2030 Specifications

General

Brand	S&C
Model	2030
Category	Switch
Language	English