(FW55C78F, FW50C78F)
1
Open the top flaps of the box.
2
Remove all accessories.
3
Prepare a
table and cover the top of it with a table cloth, blanket
or such to avoid damage to the TV set. Support both sides of the
TV set and, move it onto the table.
4
Carefully lay
the TV set, with the screen side down, on the table
so as not to deform or damage Decoration plate of the bottom
of the unit.
Caution(s)
●
To avoid damage, prevent the chin and the screen from contacting the work
table.
Chin
Installing the stands
(FW65C78F)
1
Remove both of the bottom polystyrene foam bases. Carefully
tear the
plastic bag until the bottom corner of the TV is exposed.
●
Support the top of the TV set at all times to prevent the TV
from falling.
Caution(s)
●
Before installing the matching stand, remove the protective cardboard and
carefully
peel
away the film from the area so that it will not get stuck between
the unit and the stand.
2
Lift up one side of the TV approx. 1 inch (2.5 cm) and insert the
matching stand upward until it fits the main unit.
3
Fasten the matching stand to the TV with 2 screws (included).
2 screws
required
4
In the same manner as step 2, install the other stand.
10 .English
Continued on next page.
To Next Page
Loading...
Need help?
General
