Sanyo FW50C78F User Manual

Connect to network
Setup Network Connection Settings in order to use Apps or Network
upgrade functions.
●
The meanings of abbreviations are defined as below.
AP
:
Wireless LAN access point
SSID
:
Wireless network name
●
The
key
entry screen will appear when you select SSID, WEP /
others or proxy address.
312
ManualEasy ConnectPin code
If your router does not have an easy connect feature, select Manual and press OK.
If your router has an easy connect feature, select Simple Connect and press OK.
M
a
n
ua
l
E
as
y
Connect
ode
o
Cancel
All clear
OK
Text
. , @ ’
g h i
p q r s
a b c
j k l
t u v
_ ? ! -
d e f
m n o
w x y z
abc ABC 123+/; Clear
Network settings
●
Enter the
key of the selected wireless network using
H I J K
,
then press OK.
Clear
:
Clear the entered number or word.
All clear
:
Clear all the entered numbers or words.
abc
:
Switch to the small letter mode.
ABC
:
Switch to the capital letter mode.
123+/;
:
Switch to the numeral and symbol mode.
Cancel
:
Shows the cancellation display.
OK
:
Set the entered number or word.
1
Press Z and use J K to select Setup then press OK.
2
Use H I J K to select Connect to network, then press OK.
312
Cancel
Wired
Wireless
Network settings
Select your connection type.
This TV can be connected to your
home network.
3
Adjust the following items.
Wireless setting
Select to use a wireless LAN to connect to the internet by a wireless
connection.
1
Use H I to select Wireless, then press OK.
2
Use J K
to
select the desired setting, then press OK, and follow
the on-screen instructions.
Simple Connect
Select this setting if your router has an easy
connect button. Start scanning for wireless
networks on the TV after pressing the easy
connect button on your router. If connection
test
fails,
refer to the router’s manual for more
details.
Scan
Search for wireless networks automatically
and select the wireless network name (SSID)
from the list.
Manual entry
Set up the connection to the wireless LAN
Access Point (AP) (e.g. wireless router)
manually by entering the wireless network
name (SSID).
*
Simple Connect cannot be used when the security protocol is set
to WEP. Change the Access Point’s security mode from WEP to
others (recommended).
Wired setting
Select to use an Ethernet cable to connect to the internet by a wired
connection. Please purchase shielded Ethernet cables at your local
store and use it when you connect to network equipment.
1
Use H I to select Wired, then press OK.
●
Connection test will start automatically. L p. 44
41 .English
Continued on next page.

Sanyo FW50C78F Specifications

General

Brand	Sanyo
Model	FW50C78F
Category	LCD TV
Language	English