Using options menu
You can access to some TV settings directly by using OPTIONS.
1
Press OPTIONS to display options menu, then press OK.
2
Use H I J K to select a desired setting, then press OK.
a
Options
Following settings can be configured.
Voice guide
toggle
To set Voice guide on or off.
Voice guide toggle L p. 36
Closed captions
To choose the Closed captions display setting.
Closed captions L p. 37
Digital audio
language
To Select the language according to your
preference.
(It differs depending on the program.)
Digital audio language L p. 40
Mono/Stereo
To Select an audio format.
Mono/Stereo L p. 40
b
Controls
If you have our brand products such as Blu-ray Disc™ player or
DVD recorder that are compatible with HDMI-CEC functions,
connect them to this unit via an HDMI cable so you can simply
operate various items from this unit’s remote control.
Before you begin:
select a device connected to an HDMI connection. L p. 23
You must set On in fun-Link control. L p. 35
Otherwise,
LINK
does not work even if you connected our brand
devices to this unit.
1
Press OPTIONS to display options menu.
2
Use J K to select Controls then press OK.
3
Use H I to select the desired item, then press OK.
Device-menu
Controls the menu of your connected HDMI-
CEC device.
Device-contents
Controls the top menu of your DVD or Blu-ray
Disc™.
Device-favorite
Controls the pop-up menu of your Blu-ray
Disc™.
Note(s)
●
Some of HDMI-CEC functions may not be available depending on your HDMI-
CEC devices or discs.
●
You must
connect this unit to our brand HDMI-CEC devices and be sure its fun-
Link (HDMI CEC) setting is also set to On.
●
We do not guarantee 100% interoperability with other brands of HDMI link
compliant devices.
c
Picture and sound
Following settings can be configured.
Auto picture
To set predefined picture mode.
Picture L p. 31
Auto sound
To set predefined sound mode.
Sound L p. 33
Headphone
volume
To adjust headphone volume.
Sound L p. 33
TV speakers
To Select the audio output from the unit’s
speakers or not.
Sound L p. 33
Pix shape
To switch the TV aspect ratio.
Changing Pix shape L p. 24
Setup
To display setup menu.
d
ECO settings
Following settings can be configured.
Switch off timer
You can turn off the unit automatically when
there is
no operation for specified time. In spite
of this setting, the unit goes into standby mode
automatically if there is no signal input and no
user operation for 15 minutes.
Press H repeatedly to change the amount of
time (increases the time by 30 minutes up to
240 minutes).
Each press of I will decrease the time by 30
minutes.
To cancel the timer, press I repeatedly until
“0” is displayed.
26 .English
Continued on next page.
To Next Page
Loading...
Need help?
General
