RF
RS-232
COMPONENT IN
S-VIDEO
AV O UT
AV 1 IN
Carefully check the terminals for position and type before making any connections.
The illustration of the external equipment may be different depending on your model.
Loose connectors can result in image or colour problems. Make sure that all connectors are securely inserted into their
terminals.
Refer to the operating manual of the external device as well.
When connecting an external device, turn the power off to avoid any issues.
Cautions Before Connecting
Connections
9
Connecting a VCR
S-VIDEO OUT
VIDEO OUT
L
AUDIO OUT
R
VCR
Cables are often colour-coded
to connectors. Connect red to
red, white to white, etc.
Connect the Audio/Video cables between the Audio (L/R) Video jacks on the unit and VCR.
How to connect:
1. Turn on your TV , press SOURCE button. The Input Source menu opens.
2. Press 5/6 to select AV1or S-Video and press OK to confirm.
3. Turn on your VCR, insert a videotape and press the play button.
To play VCR
The Video terminal of the AV1 INPUT and the S-Video terminal share the same audio input
terminals. For better video, you can use the S-Video terminal if your source supports it .
Note
TV REAR
To Next Page
Loading...
Need help?
General
