To Next Page

To Previous Page

Main Unit (front view/side view)

Identification of Controls

Note

1 2

SOURCE

CH VOL

3 4 5 6 7

1. Remote Sensor/Light Sensor

The light sensor will measure the room brightness, do not put anything around the sensor.

2. Power Indicator

3. POWER

To access input source menu.

5. MENU

Press this button to access the menu main page.

CH /

Press these two buttons to directly change the TV channel;

In OSD Menu, press these buttons to choose the OSD items.

VOL-/+

Press the VOL+ or VOL- button to directly increase or decrease the sound volume level;

In OSD Menu, press these buttons to adjust the value or setting of each item.

Power Switch

Press this button to turn the unit ON from STANDBY mode. Press it again to turn the set back to STANDBY.

SOURCE

SOURCE MENU

CH VOL

1. Functions of CH / , VOL-/+, MENU, SOURCE and POWER are also provided to the remote control. This operation

manual provides a description based on operating functions with the remote control.

2. Buttons on the TV are touch buttons. If you need to power on, touch POWER to turn on and all function buttons (POWER ,

SOURCE, MENU, CH / , VOL-/+) light up.

3. When buttons do not light up, touch any button to light up, then operate it as usual. Be sure button touches must be within

approx. 10 seconds of each other before the light-up disappears.

4. Press the Power Switch to power on, then please wait for some seconds (until the power indicator lights up) before you press

POWER button. Otherwise the POWER button will not respond or act wrongly.

Sanyo LCD-40XZ10F User Manual

Other manuals for Sanyo LCD-40XZ10F