13
Indicators
q
w
e
r
t
y
u
e
WARNING TEMP. indicator
This indicator flashes red when internal projector
temperature is too high. (pp.65, 72-74)
u
LAMP 1 REPLACE indicator
Turn orange when the life of the projection lamp1
draws to an end. (p.61, 73)
q
LAMP Indicator
This indicator is dim when the projector is turned
on. And bright when the projector is in stand-by
mode. (pp.72-74)
w
READY indicator
This indicator lights green when the projector is
ready to be turned on. And it flashes green in
Power Management mode. (pp.52, 72-74)
Part Names and Functions
r
WARNING FILTER indicator
– Blink slow when the filter is being scrolled (pp.
57, 72).
– Blink fast when the filter scroll is not working
properly or the filter cartridge is not installed
(pp.57, 74).
– Light orange when the clogging of the filter is
detected or the filter counter reaches a time set
in the timer setting, urging immediate filter/ filter
cartridge replacement (pp.56, 57, 74).
y
LAMP 2 REPLACE indicator
Turn orange when the life of the projection lamp2
draws to an end. (p.61, 73)
t
SHUTTER indicator
Light blue when the shutter is closed. (p72)
To Next Page
Loading...
Need help?
General
