Schematic Diagrams
CAUTION
Components indicated by a mark ! in this schematic diagram have the special significance
in the safety. It is therefore, particularly recommended that the replacement of those parts
must be made by exactly the same parts.Must be used with a specified fuse. Unauthorized
substitutions may result in fire or accident.
This projector is isolated from AC line by using the internal converter transformer. Please pay
attention to the following notes in servicing.
1. Do not touch the part on hot side (primary circuit) or both parts on the hot and cold sides
(secondary circuit) at the same time.
2. Do not shorten the circuit between hot and cold sides.
3. The grounding lead must be connected to the ground of the same circuit when measuring
the voltages and waveform.
CAUTION
Fuse of the specified parts number must
be used.
Unauthorized substitutions may result in
fire or accident.
To Next Page
Loading...
Need help?
General
