10
Top Control
y LAMP REPLACE indicator
Turn yellow when the life of the projection lamp
draws to an end. (p.60, 69)
tWARNING indicator
Emit a red light when the projector detects
an abnormal condition. This also blinks red
when the internal temperature of the projector
exceeds the operating range. (p.57, 69)
r POWER ON/STAND-BY button
Turn the projector on or off. (p.18, 20)
o POWER indicator
– Lights red when the projector is in stand-by
mode.
– Lights green during operations.
– Blinks green in the Power management mode
(p.51).
uMENU button
Open or close the On-Screen Menu. (p.21)
w POINT (ed) buttons
– Select an item or adjust the value in the
On-Screen Menu. (p.21)
– Pan the image in Digital zoom + mode.
(p.36)
q SELECT button
– Execute the selected item. (p.21)
– Expand or compress the image in Digital zoom
mode. (p.36)
q
e
t
u
i
o
r
y
Part Names and FunctionsPart Names and Functions
w
i POINT (7 8) buttons
– Select an item or adjust the value in the
On-Screen Menu. (p.21)
– Pan the image in Digital zoom + mode.
(p.36)
– Adjust the volume level. (p.24)
e AUTO SETUP button
Execute the setting of Auto setup (includes
Input search, Auto PC adj. and Auto Keystone
functions) in the setting menu. (p.23, 46).
To Next Page
Loading...
Need help?
General
