39
Video Input Video Input
Press the MENU button to display the On-Screen
Menu. Press the Point 7 8 buttons to move the red
framed pointer to the AV System Menu icon.
Video System Selection
Press the Point ed buttons to move the red arrow
pointer to the system that you want to select and then
press the SELECT button.
1
2
If the projector cannot reproduce proper video image, it
is necessary to select a specific broadcast signal format
among PAL, SECAM, NTSC, NTSC 4.43, PAL-M, and
PAL-N.
PAL/SECAM/NTSC/NTSC4.43/PAL-M/PAL-N
The projector automatically detects incoming video signal,
and adjusts itself to optimize its performance.
If the projector cannot reproduce proper video image, it
is necessary to select a specific component video signal
format among 480i, 575i, 480p, 575p, 720p, 1035i, and
1080i.
COMPONENT VIDEO SIGNAL FORMAT
Video or S-video
Component
The projector automatically detects incoming video
system, and adjusts itself to optimize its performance.
When Video System is PAL-M or PAL-N, select system
manually.
Auto
Auto
AV System Menu (Video or S-video)
AV System Menu (Component)
Move the pointer to a
system and press the
SELECT button.
AV System Menu icon
Selected system is
displayed.
AV System Menu icon
Selected system is
displayed.
Move the pointer to a
system and press the
SELECT button.
✔ Note:
The AV System Menu cannot be selected when
selecting RGB (Scart).
To Next Page
Loading...
Need help?
General
