42
7. TROUBLESHOOTING
7-1. Check before and after troubleshooting
7-1-1. Check power supply.
●
Check that voltage is in specified range (±10% of the rating).
●
Check that power is being supplied.
7-1-2. Check lead wires and connectors.
●
Check that coating of lead wires is not damaged.
●
Check that lead wires and connectors are firmly connected.
●
Check that wiring is correct.
Hazardous voltage can cause ELECTRIC
SHOCK or DEATH. Disconnect power or turn
off circuit breaker before you start checking
or servicing.
To Next Page
Loading...
Need help?
General
