TROUBLESHOOTING
Problem Cause & Solution P.
The power does
not turn on.
The batteries are consumed.
15
⇒
Replace with new batteries.
The batteries are not inserted correctly.
⇒Reinsert the batteries, making sure the polarity
(+ and –) is as indicated.
The battery compartment cover is not fully closed.
⇒Close the battery compartment cover
completely.
Due to cold temperatures, the batteries
temporarily lost their power.
69
⇒Place the batteries in your pocket, for example,
to warm them up before using them.
The power
saving function
does not
activate.
The AC adapter (sold separately;
VAR-G5U/E/EX) is connected to the camera.
—
⇒This is not a malfunction. When the AC adapter
is connected to the camera, the power saving
feature will not activate for at least 30 minutes.
The picture is
not taken when
the shutter
release button
is pressed.
The power is not turned on.
22
⇒When the power save function is active, press
the [MODE] button, or press the shutter
release button once to restore the power.
The standby indicator is flashing (the camera is
preparing to take a picture).
21
⇒Wait until the standby indicator lights to take
the picture.
The memory is full (the standby indicator flashes
quickly, and the remaining images indication on
the LCD monitor shows “0”.)
17⇒Replace the card.
⇒Remove the card and use the internal memory.
Or, when using the internal memory, insert a
card.
⇒
Erase unneeded pictures to free some memory.
Save the pictures you want to keep before
erasing data.
53
57
PowerShooting
English
72
To Next Page
Loading...
Need help?
General
