EN-42
DPOF Settings
DPOF is the abbreviation for Digital Print Order Format, which allows you to embed printing information
on your memory card. You can select the images to be printed and how many prints to make with the
DPOF menu in the camera and insert the memory card to the card compatible printer. When the printer
starts printing, it will read the embedded information on the memory card and print the specified images.
1. Slide the mode switch to [
].
2. Select the image that you want to set DPOF with the W / X
buttons.
3. Press the MENU button.
J The playback menu is displayed.
4. Select [DPOF] with the S / T buttons, and press the SET
button.
J The DPOF setting screen is displayed.
5. Select [Single] or [All] with the S / T buttons, and press the SET
button.
J [Single]: Sets DPOF for each individual image.
J [All]: Sets DPOF for all images at once.
6. Select [Print Num] with the S / T buttons, and press the SET
button.
J This displays the number of prints setting screen.
7. Set the number of prints with the S / T buttons, and press
the SET button.
J You can set up to 9 prints for each image.
8. Select [Date Print] with the S / T buttons, and press the
SET button.
J The date setting screen appears.
9. Select date to [On] or [Off] with the S / T buttons, and press the
SET button.
J [On]: The date of the image will also be printed.
J [Off]: The date of the image will not be printed.
10.Select [Print Enable] with the S / T buttons, and press the SET button.
11.Select [Execute] with the S / T buttons, and press the SET button.
Play
SET:Adj.
MENU:Exit
Play
SET:Enter
MENU:Exit
To Next Page
Loading...
Need help?
General
