EN-54
Play
SET:Adj.
MENU:Exit
Setup Menu (In Playback Mode)
1. Slide the mode switch to [ ].
2. Press the MENU button, and select the [Setup] menu with
the X button.
J [Setup] menu is displayed.
3. Select the desired [Setup] option item with the S / T buttons,
and press the SET button to enter its respective menu.
4. Select the desired setting with the S / T buttons, and press
the SET button.
5. To exit from the menu, press the MENU button.
Beep
Refer to section in this manual titled “Beep” in Setup Menu (In Photography Mode) for further details.
Format
Refer to section in this manual titled “Formatting the SD/SDHC Memory Card or Internal Memory” for
further details.
Fr. No. Reset
Refer to section in this manual titled “Fr. No. Reset” in Setup Menu (In Photography Mode) for further
details.
Card Info.
This displays the free capacity of the SD/SDHC memory card.
System Info.
This displays the firmware version of the camera.
Language
Refer to section in this manual titled “Language” in Setup Menu (In Photography Mode) for further
details.
Video Output
This sets video output system of the video equipment that you are going to connect to the camera.
* NTSC / PAL
To Next Page
Loading...
Need help?
General
