17 English
INSTALLING THE BATTERY PACK AND CARD
The card can be used after it has been formatted with the camera (page 123).
Make sure that the battery pack and the card orientation are correct.
Install the battery pack
1 Open the battery cover on the side.
h Open the battery cover by lightly
pressing it and sliding it towards the
rear.
2 Insert the battery pack.
h Firmly push it all the way in.
h Match the [I] mark on the battery
pack with the [I] mark on the
camera.
<To remove the battery pack...>
h Raise the battery pack and pull it
out.
To Next Page
Loading...
Need help?
General
