165 English
POWER SAVE FUNCTION
Your camera has a “power save” function whereby the power automatically
turns off after a specified period of inactivity. The power save function works
to conserve the battery pack power when the camera is not being used, or to
prevent the battery pack from dying if the camera has accidentally been left
on. You can specify the elapsed time (standby time) before the power save
function is activated.
1 Display the Option Setting Menu 3 (page 144).
2 Select “POWER SAVE”, and
press the SET button.
BATT:REC:
Set the standby time for the
shooting modes when the battery
pack is used.
BATT:PLAY:
Set the standby time for the
playback modes when the battery
pack is used.
AC:REC/PLAY:
Set the standby time for the
shooting and playback modes when
using an AC power source.
BLUE LIGHT:
Turn the ring-type blue LED
indicator encircling the [ ]/[ ]
buttons ON or OFF.
OK
BATT:REC
POWER SAVE
BATT:PLAY
AC:REC/PLAY
1 min
5 min
5 min
BLUE LIGHT ON
To Next Page
Loading...
Need help?
General