www.scheppach.com / service@scheppach.com / +(49)-08223-4002-99 / +(49)-08223-4002-58
GB
|
17
2. Device description (g. 1-3)
1. Engine
2.
3.
4. Transmission
5. Idle setting
6. Drive shaft
7. Drill
8. Spark plug cover
9. Choke
10. Handle
11. Stop switch
12. Transmission lubricating nipple
13. Gas regulating lever
14. Locking lever
15. Tank cover
16.
3. Scope of delivery
Motor casing with handle
Art. no. 5904702903: Auger Ø 100 mm
Art. no. 5904702904: Auger Ø 100, 150, 200 mm
Petrol mixing container
Accessories kitl
Spark plug spanner
Operating instructions
• Open the packaging and remove the device care-
• Remove the packaging material as well as the
•
•
damage.
•
period has expired.
m Attention!
The device and packaging materials are not toys!
Children must not be allowed to play with plastic
bags, lm and small parts! There is a risk of swal-
lowing and suocation!
4. Intended use
The machine complies with the relevant EC Machine
Guideline.
•
devices must be in place on the earth auger.
• The earth auger has been designed to be operated
1. Introduction
Manufacturer:
scheppach
Günzburger Straße 69
D-89335 Ichenhausen
Dear customer,
new machine.
Note:
the product that occurs due to:
• Improper handling,
• Non-compliance of the operating instructions,
•
technicians,
• Installation and replacement of non-original spare
parts,
•
We recommend:
Read through the complete text in the operating in-
structions before installing and commissioning the
device. The operating instructions are intended to
help the user to become familiar with the machine
and take advantage of its application possibilities in
accordance with the recommendations. The operat-
ing instructions contain important information on how
-
service life of the machine.
-
-
age with the machine at all times and store it in a
plastic cover to protect it from dirt and moisture. Read
the instruction manual each time before operating the
-
-
structed concerning the operation of the machine and
who are informed about the associated dangers. The
minimum age requirement must be complied with.
operating manual and the particular instructions for
-
ulations for the operation of identical devices must be
complied with.
To Next Page
Loading...
Need help?
General
