KEYPAD LOCKS
Keypad locks are always locked from the outside, by default. Only the FE595 can be set to unlocked.
To Temporarily Unlock
» If lighting is low, Press the Schlage button to illuminate the keypad before beginning.
1. Enter a User Code into the keypad.
2. Rotate the lever to open the door. Door will automatically re-lock.
To Set to Unlocked (FE595 Only)
1. Rotate the inside thumbturn to the vertical position.*
2. Rotate the thumbturn back to the horizontal position to re-lock.
* No User Code is required to open the door when the lock is set to unlocked.
Key Override
Key Override can be used when the battery is completely dead, or when no valid User Code is known.
1. Insert key.
2. Rotate key 270° to unlock.
To Next Page
Need help?
General
