Codes
Control of the lock is simply managed via a six-digit Programming Code and four-digit User Codes.
PROGRAMMING CODE
(Six Numbers)
The lock comes preset with one unique default Programming Code. It can be found on the stickers, one on the
back of the keypad assembly and one on the front of this User Guide.
Used to put the lock in programming mode.
DOES NOT unlock the lock.
The first four numbers must be different from all of the User Codes currently in the lock.
If you forget the Programming Code, you can reset the lock to factory settings, which restores the default
Programming Code. See Restore Factory Settings on page 15.
USER CODES
(Four Numbers)
The lock comes preset with two unique default User Codes. They may be found on the stickers, one on the
back of the keypad assembly and one on the front of this User Guide.
Used to unlock the lock.
These four numbers must be different from the first four numbers of the Programming Code.
Up to 19 possible User Codes can be stored in the lock at one time.
Default Code Locations
The Default User Codes and Programming Code are located in two places:
Back of the Keypad
You must remove the Keypad from the door to see this sticker.
To Next Page
Loading...
Need help?
General
