48
Connecting a PC
HDMI connection
PC HDMI 1, 2, 3 or 4
n
HDMI-certified cable
PC HDMI 2*
o
p
ø 3.5 mm stereo
minijack cable
DVI/HDMI cable
When using the HDMI 2 terminal, you must select the proper
item in the “Audio select” menu depending on the type of HDMI
cable connected (refer to page 30 for details).
Analogue connection
PC EXT 3*
q
r
RGB cable ø 3.5 mm stereo
minijack cable
PC EXT 3*
s
t
DVI/RGB conversion
cable
ø 3.5 mm stereo
minijack cable
When using the EXT 3 terminal, you must select “Video+Audio”
in the “Audio select” menu (refer to page 30 for details).
*
*
After connecting
You must also set “RGB” from the “Input select” menu
when selecting “EXT 3” from the “INPUT” menu (Pages
17 and 42).
NOTE
The PC input terminals are DDC1/2B-compatible.
Refer to page 49 for a list of PC signals compatible with the TV.
Displaying a PC image on the
screen
Selecting the picture size
You can select the picture size.
Press f.
The “Wide mode” menu displays.
Press f or a/b to select the desired item.
EXAMPLE
Normal Full
Item
Normal
Keeps the original aspect ratio in a full
screen display.
Cinema
For letterbox pictures. Bars may appear
on the top and bottom with some
programmes.
Full
An image fully fills the screen.
Dot by Dot
Displays an image with the same
number of pixels on the screen.
NOTE
You can also select an item by pressing f on the remote
control unit.
Connect the PC before making adjustments.
Selectable picture size may vary with input signal type.
Refer to page 39 for AV signals.
HDMI: 480i/480p/576i/576p/720p/1080i/1080p
ANALOGUE RGB: 576p/720p (50 Hz)/1080i
The ANALOGUE RGB (PC) terminal (EXT 3) is not compatible
with 480i/576i/1080p signals.
E
•
•
1
•
2
•
•
•
•
•
Connecting a PC
LC-LE822ERU_GB.indd 48LC-LE822ERU_GB.indd 48 2010/08/25 11:23:202010/08/25 11:23:20
To Next Page
Loading...
Need help?
General