Sharp LC-40LE810E Operation Manual

54
Appendix
Updating your TV via USB
Information
Software update
This function allows you to update to the latest software
using a USB device. You must update the software
through the USB terminal.
To check the software version for the TV, use the URL shown
on the back cover.
Go to “Menu” > “Setup” > “Information” >
“Software update”.
Press ; and then insert the USB device
containing the software update file.
CAUTION
Be sure to insert the USB device correctly into the terminal.
•
1
2
•
The TV displays a confirmation screen while
checking the data in the inserted USB device.
CAUTION
If the data is not compatible with the system, an error message
appears on the screen. Repeat steps 2 and 3 after pressing
;.
When an error message displays, check to see if:
The USB device is inserted firmly.
The USB memory has two or more software update files.
No data for updating the system exists in the USB
memory.
The software update file is broken.
The software update file is not compatible with your TV’s
software.
The current system is same as the system update data.
The TV displays the software version
information after checking the data.
Press c/d to select “Yes” to update the
system, and then press ;.
Press ; to automatically reset and start the
update operation.
This operation may take a while.
The TV starts updating the system
A confirmation message appears on the
screen after completing the update and
then automatically restarts the TV. Press
; to complete the operation.
3
•
•
•
•
•
•
•
•
4
5
6
•
LC-LE822ERU_GB.indd 54LC-LE822ERU_GB.indd 54 2010/08/25 11:23:322010/08/25 11:23:32

Sharp LC-40LE810E Specifications

General

Brand	Sharp
Model	LC-40LE810E
Category	TV
Language	English