Sharp LC-40LX630E User Manual

25
LC-32LE63x
LC-40LE63x
LC-46LE63x
Notes:
• Figures below can deviate slightly from the actual situation,
due to the different set executions.
10 tapes (80 mm)
2 tapes (150 mm)
2 conductive tapes (40 mm)
1 x 11 mm clamp
Figure 4-1 Cable dressing LC-32LE63x Series
4.1 Cable Dressing LC-xx63xE/RU series Styling
Index of this chapter:
4.1 Cable Dressing LC-xx63xE/RU series Styling
4.2 Service Positions
4.3 Assy/Panel Removal Sundance Styling (LC-xxLE63xE/RU series)
4.4 Set Re-assembly
4.5 Dimensions 32”
4.6 Dimensions 40”
4.7 Dymensions 46”
4.8 Removing of Major Parts 32”
4.9 Removing of Major Parts 40” & 46”
MECHANICAL INSTRUCTIONS
4. Mechanical Instructions

Sharp LC-40LX630E Specifications

General

Response time	6 ms
Display diagonal	40 \
Display brightness	450 cd/m²
Native aspect ratio	16:9
Native refresh rate	100 Hz
LED backlighting type	Edge-LED
Supported video modes	1080p
Display diagonal (metric)	102 cm
Viewing angle, horizontal	176 °
Supported graphics resolutions	1920 x 1080 (HD 1080)
3D	No
Annual energy consumption	70 kWh
Tuner type	Analog & digital
Analog signal format system	NTSC, PAL, SECAM
Digital signal format system	DVB-C, DVB-T
RMS rated power	10 W
Number of speakers	2
HDMI version	1.4
HDMI ports quantity	3
DVI-D ports quantity	0
USB 2.0 ports quantity	1
Video formats supported	H.264, MPEG4
Panel mounting interface	400 x 400 mm
Power consumption (standby)	0.15 W
Power consumption (typical)	48 W

Weight and Dimensions

Depth (with stand)	242 mm
Height (with stand)	630 mm
Weight (with stand)	14700 g
Depth (without stand)	40 mm
Width (without stand)	947 mm
Height (without stand)	560 mm