Sharp LC-60LE452U User Manual

Sharp LC-60LE450U/LC-60LE452U Service manual
29
6. Software update procedure
6.1 Enter factory menu mode method
6.1.1 Press “MENU + 0000” display factory menu as photo 6.1
This factory menu contain following functions
1) Check software Version as photo 6.2
2) VGA or Ypbpr ADC Adjust
3) Initial EEPROM
4) Entering burning mode
5) Factory Reset
Photo 6.1 Photo 6.2
6.2 Software update procedure
6.2.1 Software update cautions
1) Do not remove the USB memory device or unplug the AC cord while the software is being
updated
2) Be sure to properly follow the whole procedure described below, step by step. Otherwise, For
example, the TV can not read the data in the USB memory device and software updating will
fail.
3) Make sure put .bin file (the file must begin with ATSC) under the root directory of USB disk in
advance.

Sharp LC-60LE452U Specifications

General

Brand	Sharp
Model	LC-60LE452U
Category	LED TV
Language	English