Siemens 1FT7 Series User Manual

ENGLISH
Siemens AG 610.40 075.21
13
You will find more technical details, e.g. motor dimensions, in the catalogs NC 60, NC 61,
D21.1 or Configuration Manual.
4 Transport, Installation and Assembly
4.1 Transport, Storage
Observe the transport regulations applying in the country/countries concerned.
Use suitable load suspension devices for transport and assembly.
Use lifting eyes for transporting the motors where these are provided by the manufacturer.
Lifting tackle as per 98/37/EU Directive for Machines, Appendix I.
The motor weight is indicated on the rating plate.
Fig. 2 Lift and transport with suspension bands
The motors should be stored indoors in dry, low-dust and low-vibration (v
eff
< 0,2 mm/s)
rooms. The motors should not be stored longer than two years at room temperature
(+5 °C to +40 °C) (41 °F to 104 °F) to retain the service life of the grease.
WARNING
Danger during lifting and transporting procedures!
Improper handling, unsuitable or defective devices, tools etc. can
cause injuries and/or property damage.
Lifting devices, ground conveyors and lifting tackle must correspond
to the valid regulations.

Siemens 1FT7 Series Specifications

General

Brand	Siemens
Model	1FT7 Series
Category	Engine
Language	English