Router User’s Guide Configuring Network Settings
Server Ports
Common applications such as HTTP (Web site traffic), FTP, and Telnet use pre-defined incoming port
numbers for compatibility with other services. If you wish to change the ports used by these applications
you may do so using this option. This feature is recommended for use by advanced users only.
To configure the server port option:
1. Select Setup>Server Ports from the left navigation pane of the Web interface. This displays the
“SpeedStream Gateway Server Ports” window.
2. Optionally, type a port number in the HTTP box. The default port for this field is 80.
3. Optionally, type a port number in the FTP box. The default port for this field is 21.
4. Optionally, type a port number in the Telnet box. The default port for this field is 23.
5. Click Apply. This displays the “Your settings have been saved” window.
6. Optionally, click Reboot if you wish for the settings to immediately be implemented. The system
responds by restarting your Router.
36
To Next Page
Loading...
Need help?
General
