OPERATING YOUR HEARING INSTRUMENT-PROGRAMMABLE FEATURES
29
OPERATING YOUR HEARING INSTRUMENT-OPTIONAL FEATURES
28
The EXPLORER
®
500 P is equipped with a different battery
compartment lock (Fig. 19). Use a small screw driver to lock
and unlock the battery compartment door.
To Lock
• Pushthesmallslidetotheright.Thebattery
compartment is now locked.
To Unlock
• Pushthesmallslidetotheleft.Thebattery
compartment is now unlocked.
Ask your Audiologist and Hearing Care Provider if you
need assistance.
Locked
Unlocked
Fig. 19: EXPLORER
®
500 P compartment door,
locked, unlocked
Wireless functionality (if applicable)
Your hearing instrument may be equipped with wireless
functionality. This provides synchronization between
two hearing instruments. If you change the program or
volume on one instrument, the other is automatically
changed. In addition, wireless technology automatically
adjusts the system to change both hearing instruments
simultaneously to adapt to different listening situations.
The wireless functionality also enables use of an optional
remote control.
Note: The performance of the e2e® wireless 2.0 could be temporarily
affected when in close proximity to electromagnetic noise
sources, such as a computer monitor or television. Move away
from the noise source if you experience difficulty.
Technical information for e2e 2.0 wireless function:
Operating frequency : Fc = 3.28 MHz; Maxium field strength: –7 dB
µA/m at 10m meters.
Changes or modifications not expressly approved by the party
responsible for compliance could void the users authority to operate
the equipment.
This Class B digital apparatus complies with Part 15 of FCC Rules.
Operation is subject to the following two conditions: (1) this device
may not cause interference,and (2) this device must accept any
interference, including interference that may cause undesired
operation of the device. FCC: SGI-WL002BTE
To Next Page
Loading...
Need help?
General
