Siemens Climatix HMI-TM User Manual

16 / 38
Siemens Climatix HMI-TM CB1P3917en02
Building Technologies 3BFunctions and operations 2015-07-02
4.4 Log in
After the communication between HMI-TM and controller has been set up, users
can log in with one of the following user levels listed in the table:
User level
Icon
Recommended usage
Description
Not login
The access rights of this
level are suitable for
users who view the basic
information of Climatix
range controllers.
No password required. The setting
is in accordance to the access
right from privilege 253 to 255 in
Climatix SCOPE. Refer to Climatix
SCOPE online help for details.
End user
The access rights of this
level are suitable for
users who operate the
Climatix range controllers.
These user levels are password
protected.
Service
The access rights of this
level are suitable for
users who perform
maintenance to Climatix
range controllers.
OEM
factory
The access rights of this
level are suitable for
users who configure the
Climatix range controllers.
The specific access right for each user level can be defined by application engineer.
The password related templates in SCOPE are listed in the following table, which
can be defined by application engineer in SCOPE.
Name
No.
1
Password entering page
[65410]
2
Password handling page
[65400]
3
Change factory password page
[65450]
4
Change service password page
[65451]
5
Change end user password page
[65452]
If users enter any one of these five pages from templates and press key ENTER, it
will check if the title line of the corresponding templates has defined the target page
and if the current user level has enough privileges.
If yes, it will redirect to the defined target page. If not, it will redirect to the home
page.
Press key INFO on any one of these five pages to go to the home page.
1. Press and hold key ENTER on any page (except the error report pages)
with OEM factory user level to activate the log in/off page as follows:
User level
Password management
Password
related
templates
For example

Siemens Climatix HMI-TM Specifications

General

Brand	Siemens
Model	Climatix HMI-TM
Category	Controller
Language	English