24/30
Siemens Climatix touch
panel A6V10445442_en--_a
Building Technologies Configuring the Climatix touch panel 2015-06-30
4. Press Open in both setting mode and monitor software to open the serial port.
5. In setting mode, enter test data (for example, 1234) in the Send characters
textbox and press Senddata.
If the monitor software receives the same data (1234, in this example), the test
is successful.
6. In monitor software, enter test data and send it.
If the Receiving a character textbox displays the same data, the test is
successful.
6.5 Set the language
Press Language, select the desired display language and press Ok.
To Next Page
Loading...
Need help?
General
