Siemens Industry, Inc.
Building Technologies Division
P/N 315-050537-322
The following table describes the possible entries in the System Save & Load via
HTTP feature.
PTTHAIVDAOL&EVASMETSYS
elifnoitarugifnoC ehtfohtapredlofoslaylbissopdnaemaN
taht)sretcarahc23mumixam(eli
fnoitarugifnoc
hctiwsrebifecnalacSehtnodaolottnawuoy
tnerrucehterotsottnawuoyerehwro
.noitamrofninoitarugifnoc
eliFgoLtnevE ylnotnaveler(
)sehctiwsTRIrof
tneveehtevasnacuoy",evaS"gnikcilcyB
.CPruoyot)elifgoltne
ve(elbat
eliFerawmriF ehtdaolothsiwuoyhcihwmorfemanhtaplluF
.erawmrifwen
DIAGNOSTICS Diagnostics of the fiber switch can be done remotely, as explained below:
• Launch web browser and type in URL of the fiber switch on which diagnos-
tics will be run
• The LEDs status on the top left of the screen are the exact same as that
shown on the fiber switches.
Red indicates an error.
Green LEDs indicate that the switch is running properly.
Green also indicates ports that have an Ethernet connection to them.
Figure 29
Fiber Switch Diagnostic Indicators
To Next Page
Loading...
Need help?
General