Siemens Scalance X204-2 Multimode User Manual

Siemens Industry, Inc.
Building Technologies Division
P/N 315-050537-327
Figure 35
Adding An NCC Node
Adding An XLS To add an XLS node, complete the following steps (refer to Figure 36):
• Type in the Node number to match the Node number from the Zeus
configuration.
• Add a Node Name.
• Choose “XLS” as the Node Type.
• Choose the Node numbers of the NCC as the Default NCC-G Control
Setting.
• Click the Save button.

Siemens Scalance X204-2 Multimode Specifications

General

Brand	Siemens
Model	Scalance X204-2 Multimode
Category	Switch
Language	English