Siemens SED2 User Manual

SED2 AOP Operating Instructions
24 Siemens Building Technologies
AOP Setup & Configuration
Setup Menu
Using the Setup option from the Main Menu of the AOP, you can personalize the following
characteristics of the AOP:
• Backlighting
• Screen Contrast
• Large Numbers
• Cursor Type
• Start Help
• Welcome Text
• Parameter Set Names (Expert Level and above only)
• User Defined Text
• Set Time/Date (Service Level only)
• AOP Reset
Use the following procedure to access the Setup menu:
1. From the main menu, use
and to scroll through the list of options and to highlight the
Setup item.
Press
to confirm the selection. The AOP displays a setup menu.
2. Use
and to scroll through the setup menu and to highlight the desired option.
Press
to confirm the selection.
NOTE: Simultaneously press and at any time to display relevant help screens.
Backlighting
To activate the backlighting option on the AOP, the following procedure should performed:
1. Use
and to highlight the Backlighting option on the setup menu.
Press
to confirm the selection.
The AOP displays a backlighting selection screen.
2. Use
and to select either an OFF or ON backlighting status.
Press
to confirm the selection.
NOTE: When you select OFF for no backlighting, the AOP returns to the setup menu.
3. When you select ON for backlighting, the AOP displays a backlighting timer screen. The
backlighting timer turns off the AOP backlighting after a specified time period of inactivity (in
seconds).
Use
and to select either an OFF or ON timer function.
Press
to confirm the selection.
NOTE: When you select OFF for the backlighting timer, the AOP returns to the setup
menu and the AOP backlighting functions continuously.

Siemens SED2 Specifications

General

Brand	Siemens
Model	SED2
Category	DC Drives
Language	English