Siemens SED2 User Manual

AOP Setup & Configuration
Siemens Building Technologies, Inc. 25
4. When you select ON for backlighting timer, the AOP displays a backlighting time setting
screen.
Use
and to set the timer period of inactivity (in seconds).
Press
to confirm the setting and the AOP returns to the setup menu.
NOTE: Simultaneously press and at any time to display relevant help screens.
Screen Contrast
1. Use and to highlight the Screen Contrast option on the setup menu.
Press
to confirm the selection.
The AOP displays a contrast screen.
2. Use
and to adjust the contrast level.
Press
to confirm the selection and the AOP returns to the setup menu.
Large Number Display
You can configure the AOP for a large-number display of the SED2 VFD frequency.
In the Large Number Display mode, you can temporarily switch to normal display mode (4 lines)
with the keys
and . After an adjustable time delay, the display switches back to large
characters.
Use the following procedure to activate the large number display:
1. Use and to highlight the Large Numbers option on the setup menu.
Press
to confirm the selection. The AOP displays a large number screen.
2. Use and to select either an OFF or ON large number display.
Press
to confirm the selection.
NOTE: When you select OFF for no large number display, the AOP returns to the setup
menu.
3. Select a requested delay time (4 through 250 seconds).
Press
to confirm the selection and to return to the main menu.
Cursor Type
1. Use and to highlight the Cursor Type option on the setup menu.
Press
to confirm the selection.
The AOP displays a cursor type screen.

Siemens SED2 Specifications

General

Brand	Siemens
Model	SED2
Category	DC Drives
Language	English