Setting the IP address of the ChemWeb Server
22
Setting the IP address of the ChemWeb Server with DHCP
The network administrator must reserve a fixed IP address at the DHCP server. For this purpose he
needs the MAC address (see label at the ChemWeb Server).
The entry box “Use DHCP” must be clicked and the settings must be confirmed by clicking “Yes”.
Now the ChemWeb Server must be restarted. Then the DHCP server will assign the IP address, the
network mask and, if applicable, the Gateway address to the ChemWeb Server.
Connection via Internet
As soon as dialing into the Internet and an information e-mail have been initiated by the following
events, the ChemWeb Server can be accessed in the Internet via the IP address which is notified in the
e-mail:
- Manual dialing by clicking “Connect ISP” (see chapter 4.1.6)
- Connection by a daily information mail (see chapter 4.1.3)
- Connection by events (see chapter 4.1.4)
To access the ChemWeb Server using a laptop computer/PC, a connection to the Internet must be
established before via any provider and any type of port (analog, ISDN, DSL ...). The ChemWeb
Server can be reached via the IP address notified in the e-mail at least for the duration which is
defined under “Mail Configuration”.
To Next Page
Loading...
Need help?
General