Top view of the 100 to 240VAC / 110 to 250VDC device versions
Figure10-3 Depth
10.2 Mounting brackets for use on ships
You need special mounting brackets to install the device horizontally on a ship.
Below you will nd the design drawing for making the mounting brackets.
You will nd the more information on the construction of the mounting brackets in the
section "Technical specications (Page85)".
Note
ISO tolerance and punching burr
For dimensions without tolerance details, the general tolerances "medium" acc. to DIN ISO 2768
apply. No punching burrs are permitted.
Dimension drawings
10.2Mounting brackets for use on ships
SCALANCE XR-300
102 Operating Instructions, 03/2023, C79000-G8976-C586-02
To Next Page
Loading...
Need help?
General