Siemens SIMATIC NET SCALANCE XR-300 User Manual

Can only be operated in SFP+ slots.
Note
Restriction for pluggable transceivers
The maximum ambient temperature changes if you use pluggable transceivers:
• If you use pluggable transceiver SFP993-1LH, the maximum ambient temperature is reduced
to 50℃.
For the values of the ambient temperature without pluggable transceivers, refer to the section
"Technical speci󹪝cations (Page85)".
4.7 LED display
4.7.1 Position
The following 󹪝gure shows the arrangement of the LEDs using the example of a SCALANCE
XR322-12.
)506%'0/
3333333
/'0
333 33 3333
3333333333 333 33333
P LEDs for displaying the port status
*)
F LED for displaying the fault/error status
L1/L2 LEDs for displaying the power supply
RM LED for displaying the "redundancy manager" function
SB LED for displaying the "standby" function
DM1/DM2 LEDs for displaying the display mode
Figure4-5 Arrangement of the LEDs using a 24VAC/DC device version with 12 SFP-/SFP+ slots
*
)
The number of port LEDs depends on the device.
4.7.2 Port LEDs
The port LEDs "P1", "P2" etc. show information about the corresponding ports.
Description of the device
4.7LED display
SCALANCE XR-300
Operating Instructions, 03/2023, C79000-G8976-C586-02 35

Siemens SIMATIC NET SCALANCE XR-300 Specifications

General

Brand	Siemens
Model	SIMATIC NET SCALANCE XR-300
Category	Switch
Language	English