Replacing an HMI device
2.2 Mounting cut-out
Migration Guide Comfort Panels
Getting Started, 03/2011, A5E03478626-01
15
The following figure shows the dimensions of the mounting cut-out for the OP MP 277 8"
Touch (blue) and the TP900 Comfort (orange):
The following figure shows the dimensions of the mounting cut-out for the MP 277 10" Touch
(blue) and the TP1200 Comfort (orange):
The following figure shows the dimensions of the mounting cut-out for the MP 277 10" Key
(blue) and the KP1200 Comfort (orange):
To Next Page
Loading...
Need help?
General
