Siemens SIMOTION D4x5 Series User Manual

Data SIMOTION D425 SIMOTION D435 SIMOTION D445/
D445‑1
PROFIBUS interfaces 2 2 2
PROFINET interfaces Optionally via CBE30:
●
1 interface with 4
ports
● Supports
PROFINET IO with
IRT and RT
● Can be configured
as PROFINET IO
controller and/or
device
Optionally via CBE30:
● 1 interface with 4
ports
● Supports
PROFINET IO with
IRT and RT
● Can be configured
as PROFINET IO
controller and/or
device
Optionally via CBE30:
● 1 interface with 4
ports
● Supports
PROFINET IO with
IRT and RT
● Can be configured
as PROFINET IO
controller and/or
device
Address space
Table 5-8
Address space
Address space SIMOTION D425 SIMOTION D435 SIMOTION D445/
D445‑1
Logical I/O address space in KB 16 KB 16 KB 16 KB
Physical I/O address space in KB
●
PROFIBUS (per interface): max.
each for inputs and outputs
● PROFINET: max. each for inputs and
outputs
● 1 KB
1)
● 4 KB
1)
● 1 KB
1)
● 4 KB
1)
● 1 KB
1)
● 4 KB
1)
Permanent process image for
BackgroundTask (I/O variables)
64 bytes 64 bytes 64 bytes
Additional configurable process image for
each cyclic task (I/O variables)
yes yes yes
Address space for each PROFIBUS DP
station
244 bytes 244 bytes 244 bytes
Address space per SINAMICS Integrated/
CX32 (PROFIBUS Integrated)
512 bytes 512 bytes 512 bytes
Address space for each PROFINET
device
1,400 bytes 1,400 bytes 1,400 bytes
1)
When PROFIBUS and PROFINET are used, the total address space applies
Technical data
5.1 Technical data D4x5
SIMOTION D4x5
Manual, 04/2014 69

Siemens SIMOTION D4x5 Series Specifications

General

Brand	Siemens
Model	SIMOTION D4x5 Series
Category	Control Unit
Language	English