20.2 Activating Easy Message
To commission the connection to the modem for the SMS Messenger, activate the SIM card
at the initial start-up.
Requirement
The modem is connected and the interfaces are activated.
Machine manufacturer
The modem is activated via the machine data 51233 $MSN_ENABLE_GSM_MODEM.
Please refer to the machine manufacturer's specifications.
Procedure
Activating the SIM card
1. Press the "Easy Msg." softkey.
The "SMS Messenger" window appears.
"Status" shows that the SIM card has not been activated with a PIN.
2. Enter the PIN, repeat the PIN and press the "OK" softkey.
3. If you made an incorrect entry several times, enter the PUK code in the
"PUK Input" window and press the "OK" softkey to activate the PUK code.
The "PIN input" window is opened and you can enter the PIN number as
usual.
Activating a new SIM card
1. Press the "Easy Msg." softkey.
The "SMS Messenger" window appears.
"Status" shows that the connection to the modem has been activated.
2. Press the "Settings" softkey.
3. Press the "Delete PIN" softkey to delete the stored PIN.
Enter the new PIN in the "PIN Input" window at the next power up.
Easy Message (828D only)
20.2 Activating Easy Message
Milling
882 Operating Manual, 08/2018, 6FC5398-7CP41-0BA0
To Next Page
Loading...
Need help?
General
