3.5 Powerride
Features of the Powerride:
• Rotary wheel with integrated momentary contact switch
• 36 notches per revolution, incremental counter
• Scale with RGB LEDs
• LED strip approx. 2/3 of a circle with 25 segments
• The color for all of the segments can be congured - 3 bits (RGB)
• Key for single start with LED
• The symbol for the "Cycle Start" momentary contact switch can be backlit with a green LED
• Vibrating motor for haptic feedback signals, with choice of vibration patterns
Note
The Powerride is wired to the communication module of the MCPs on delivery.
Additional information
Further information on the function description can be found in the respective PLC Equipment
Manuals.
e.g. for SINUMERIK ONE "LBP_PowerRide" function block
3.6 Override rotary switch with 16/23/29 positions
• Up to 2 overrides can be used
• 16, 23 or 29 positions
• Gray-code coding
• Central attachment
• Connection via ribbon cable with plug connector
Operator control and display elements
3.6 Override rotary switch with 16/23/29 positions
ONE MCP Part 1: MCP xxxx
26 Equipment Manual, 07/2020, A5E50324729B AA
To Next Page
Loading...
Need help?
General
