13
Handling and use
SAR 28 A1
GB
IE
Handling and use
This section provides you with important information on handling and using the
device.
NOTE
►
If no setting is confi gured and/or no button pushed within about 5 seconds,
the device returns to its previous operating mode. Settings changed are saved.
Switching on and off
♦ Press the /MU
2
button to switch the device on. The WELCOME display
is shown.
♦ To switch off , keep the /MU button pressed. The GOODBYE display is
shown.
Settings
WARNING
Hearing damage as a result of too high a volume!
Setting the volume too high can result in permanent hearing damage.
► Set the volume to moderate levels only.
Volume
♦ Turn the multi-controller
17
to set the volume.
Switching mute on / off
♦ Press the /MU button briefl y to turn the sound off . The MUTE ON message
appears in the display.
♦ Press the /MU button again to turn the sound on again. Muting is
cancelled when receiving a PTY or TA station.
Operating mode
♦ Press the MD/PTY
3
button to switch between radio reception (TUNER),
card reader (CARD), USB port (USB) and audio input (AUX).
NOTE
►
The CARD and USB operating modes can only be enabled once the appro-
priate medium has been inserted.
IB_85465_SAR28A1_LB3.indb 13IB_85465_SAR28A1_LB3.indb 13 06.12.12 16:4706.12.12 16:47
To Next Page
Loading...
Need help?
General
