Silvercrest SDB 2400 A1 User Manual

15
SDB 2400 A1
GB
IE
Troubleshooting
PROBLEM POSSIBLE CAUSE POSSIBLE SOLUTIONS
The appliance does not
function. The control lamp
"Power" does not glow.
The plug is not connected to
the mains power supply.
Connect the appliance to a mains
power socket.
The appliance is damaged.
In this case, contact Customer
Services.
After ironing, there are
stains on the textiles
The soleplate 9 is soiled.
First carry out a self-cleaning
process and then clean the iron.
You have poured chemical
additives into the water tank.
Empty the water tank, carry out a
self-cleaning process and then fi ll it
with only water as per the instruc-
tion in "Filling with mains water".
You have sprayed laundry
starch onto the fabric.
In principle, spray laundry starch
onto the back of the fabric. Clean
the sole of the iron 9.
The control lamp "Tempera-
ture" 4 lights up and then
goes out.
This is not a defect: the control
lamp "Temperature" 4 in-
dicates the heating up of the
appliance.
-
It will not produce steam.
The steam regulator 1 is
placed at the position
.
Adjust the steam regulator 1 to
a higher position.
There is not enough water in
the water tank.
Fill the water tank with water..
The set temperature is too low
for steam generation.
Set the temperature regulator 7
to at least level
or higher.

Silvercrest SDB 2400 A1 Specifications

General

Brand	Silvercrest
Model	SDB 2400 A1
Category	Iron
Language	English