Silvercrest SLB 10 A1 User Manual

SLB 10 A1
GB
│
IE
│
49 ■
Charging the internal battery
CAUTION
► Charge the speaker only in dry interior rooms.
► Due to the high power consumption, the speaker must be charged
using a USB mains adapter. Do not charge the speaker from the USB
port of a PC or notebook.
► Use only USB mains adapters with an output voltage of 5V and an
output current of at least 900mA to charge the speaker.
► Use only the supplied charging cable e to charge the speaker!
► Always disconnect the charging cable e when charging is complete!
Before using the speaker, the integrated battery must be completely charged.
♦ Open the protective cover 0.
♦ Connect the USB type-A connector of the charger cable e to a suitable
USB mains adapter (not supplied).
♦ Connect the micro-USB plug of the charging cable e to the micro-USB
charging port q on the speaker.
♦ When charging is complete, remove the charging cable e from the
speaker and close the protective cover 0.
IB_330701_SLB10A1_LB8.indb 49 30.06.2020 12:24:19

Silvercrest SLB 10 A1 Specifications

General

Brand	Silvercrest
Model	SLB 10 A1
Category	Speakers
Language	English