Silvercrest SLB 10 A1 User Manual

SLB 10 A1
GB
│
IE
│
53 ■
NOTE
► If you want to connect the currently connected speaker to another
Bluetooth
®
device, start by pressing the button 6 to discon-
nect the currently connected Bluetooth
®
device from the speaker.
Alternatively, you can deactivate the Bluetooth
®
function on the
connected Bluetooth
®
device. You will hear a descending series
of beeps and the operating/charging LED 9 will flash alternatively
orange and blue. The speaker is now ready to be paired with
another Bluetooth
®
device.
NFC function
The NFC function (Near Field Communication) can be used
to establish a Bluetooth
®
connection quickly and easily.
NOTE
Using the NFC function to establish a Bluetooth
®
connection only
works under the following conditions:
► The Bluetooth
®
device is less than 1 cm from the NFC logo on the
top of the speaker.
► The speaker is not connected to another Bluetooth
®
device via
Bluetooth
®
.
♦ Make sure that the speaker is switched on.
IB_330701_SLB10A1_LB8.indb 53 30.06.2020 12:24:19

Silvercrest SLB 10 A1 Specifications

General

Brand	Silvercrest
Model	SLB 10 A1
Category	Speakers
Language	English