Singer 1732 User Manual

Raise the presser bar (a). Attach the presser foot shank (b) as
illustrated. (1)
Lower the presser foot shank (b) until the cut-out (c) is directly
above the pin (d). (2)
Lower the presser foot shank (b) and the presser foot (f) will
engage automatically.
Raise the presser foot. (3)
Raise the lever (e) and the foot disengages.
Attach the seam guide (g) in the slot as illustrated. Adjust
according to need for hems, pleats, etc. (4)
Turn power switch to off ("O") when carrying out any of the
above operations!
Attaching the presser foot
Removing the presser foot
Attaching the seam guide
Attention:
16
Attaching the presser foot shank
12
34
GB
a
c
d
e
f
b
b
a
e
g

Singer 1732 Specifications

General

Type	Mechanical
Stitch Width	5mm
Built-in Stitches	32
Buttonhole Styles	1-step
Built-in Needle Threader	Yes
Free Arm	Yes
Stitch Options	decorative, stretch
Included Accessories	All-purpose foot, zipper foot, buttonhole foot, button sewing foot, seam ripper, needles, bobbins, screwdriver, spool pin felt
Dimensions	12 inches