Singer 1732 User Manual

GB
Darning
- Turn stitch length dial to the desired length.
- Turn stitch selector to "A", center needle position.
- Position the fabric to be darned under the presser foot
together with the under laying fabric to be used.
- Lower the presser foot and alternately sew forward or reverse
using the lever.
- Repeat this motion until the area to be darned is filled with
rows of stitching.
For reverse sewing instructions, see page .32
64

Singer 1732 Specifications

General

Type	Mechanical
Stitch Width	5mm
Built-in Stitches	32
Buttonhole Styles	1-step
Built-in Needle Threader	Yes
Free Arm	Yes
Stitch Options	decorative, stretch
Included Accessories	All-purpose foot, zipper foot, buttonhole foot, button sewing foot, seam ripper, needles, bobbins, screwdriver, spool pin felt
Dimensions	12 inches